This presense detector using PIR (passive infrared receiver) detects the presence of a person in a room. The units send information to a controller or any other associated Z-Wave device. Up to 4 devices can be controlled from this device.
The sensor is a battery-powered device, which is in sleeping state unless an action is detected. After a programmable sleeping time the device wakes up and sends a status information. After this the unit goes back to sleeping modus. Batteries can be changed without unscrewing the device from the door or frame. The unit will give a visual warning on the device and sends a warning to the Z-Wave controller, when batteries need to be replaced. The unit offers a tampering control and sends an alarm message when tampered.
The device has changable lenses to optimize the monitoring of the room. A built in 60 db siren can be used if the sensor is in security application mode. A built in light sensor can be used to detec ambient light.
The device needs to be included into a Z-Wave network by a remote control or any other Z- Wave controller. For configuration of certain behaviour a static controller such as a PC with home automation software or a gateway is required.
- Wireless behaviour: transmitter
- Z-Wave type: slave
- Distance: up to 30 m in buildings
- Display: LED
- Local interaction: one button for inclusion, wakeup and exclusion
- Motion detector:
- Distance: up to 12 m
- Angle: 110 degree on default for wall, 360 degree for ceiling mounting
- Power supply: 3 * AA batteries